Question: What Size Is A M8 Washer?

How big is a #4 washer?

Standard Round Washers in 304 Stainless SteelFlat Washer SizesInner Diameter (ID)Outer Diameter (OD)#40.125″0.312″#60.149″0.375″#80.174″0.375″#100.203″0.437″16 more rows.

Is m6 bigger than m8?

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”)….Table 3.MetricClosest InchM6-1.01/4-28 (Larger)M7-1.01/4-28 (Smaller)M8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)16 more rows

What size washer do I need for a 1/4 bolt?

Flat Washer DimensionsBolt SizeUSSSAE1/4 (#14)0.7340.6255/160.8750.6883/81.0000.8127/161.2500.92223 more rows

Are all washing machines the same size?

Washing machines come in standard height (85cm) and width (60cm) measurements, it’s just depth that can change depending on size of the drum. … But most integrated models are a standard size of height (82cm) x width (60cm) x depth (54 to 56cm) so that they can fit under a standard kitchen worktop.

How much room do you need behind a washing machine?

Around six inchesBoth washers and dryer require a significant space for their water hoses and hookups. Dryers also need extra space for adequate ventilation. Around six inches of space behind your washer and dryer is ideal.

How thick are standard washers?

Forums for working professionals.SIZEINSIDE DIAMETERTHICKNESS1-1/81-3/16″9/64″1-1/41-5/16″5/32″1-1/21-7/16″3/16″USS FLAT WASHERS37 more rows•Oct 20, 2006

What size are washers?

Compact washers are usually 2.30 to 2.45 cubic feet. Both standard and high-efficiency top load washers range between 3.1 and 4.0 cubic feet. Front load high-efficiency washers can range from 4.0 cubic feet to an extra large capacity of 5.0 cubic feet. Most front loaders are between 4.2 and 4.5 cubic feet.

What is the difference between USS and SAE flat washers?

Figure 1 illustrates the dimensional differences between the same internally sized flat washers: The USS flat washer is on the left, and the SAE flat washer is on the right. The inside diameter of the USS flat washer is between 5 to 7 percent larger, on average, than the SAE washer.

What does the M mean on bolts?

The “M” designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

What is the size of an m8 bolt?

Tap sizeBasic major dia (mm)Basic major dia (inch)M6 x 16mm.2362M8 x 1.258mm.3150M8 x 18mm.3150M10 x 1.510mm.393724 more rows

Is m8 same as 8mm?

All dimensions of the bolt (and nut) are a parameter of its basic diameter. The “M8” refers to an approximation of the major diameter of the thread of 8mm – actually slightly less, like 7.9, as the sharp edges are rounded off.

How thick is a washer in MM?

Dimensions for DIN125 Form A WashersBolt SizeInside DiameterThicknessM88.4mm1.6mmM1010.5mm2.0mmM1112.0mm2.5mmM1213mm2.5mm30 more rows

What are m8 screws?

M8 is the designation for a metric (M) sized bolt or screw that is 8mm (8) in diameter. This is roughly equivalent to a 5/16 bolt or screw. An M8 Bolt or screw refers to the bolts diameter in Millimeters. It is a metric measurement.

Are washers standard size?

Conventional top-loading washer models feature a wide range of capacities, but their exterior widths are usually similar. Top-loading washers with an agitator are generally 27 to 27 1/2 inches wide. These traditional models are 42 to 43 inches high and 25 1/2 to 27 inches deep.

What does USS stand for in washers?

United States Standard threadFrom Wikipedia, the free encyclopedia. United States Standard thread (USS thread), also known as Sellers Standard thread, Franklin Institute thread and American Standard thread, is a standard for inch based threaded fasteners and washers.

What size washer do I need for a family of 2?

One to two person household can use a small to medium size washer (1.8 to 3.5 cu ft) while a family should opt for a large washer (3.6 to 5.1 cu ft). The dryer should be almost twice as large as the washer so wet clothes can tumble freely and dry more quickly.

What size washer do I need for a 3/8 bolt?

USS and SAE Washer DimensionsSizeUSSSAEInside Diameter (A)Inside Diameter (A)1/4″5/16″9/32″5/16″3/8″11/32″3/8″7/16″13/32″21 more rows

What does m8 1.25 mean?

For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.